Ethereal-users: RE: [Ethereal-users] mirrored/monitored/SPAN'd port not working
Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.
From: Mike Kelley <MikeK@xxxxxxxxx>
Date: Mon, 15 Sep 2003 16:26:35 -0600
I've re-scanned that document our router is a 3500 series so I see the features are limited on that router. I can not find anything referring to TRUNKS under the 3500 series ... I tried adding the "PORT MONITOR VLAN 11" to my monitoring port with no luck Mike -----Original Message----- From: Aaron Hite [mailto:ahite@xxxxxxxxxxxx] Sent: Monday, September 15, 2003 2:39 PM To: BRAndon@xxxxxxxx; MikeK@xxxxxxxxx Cc: ethereal-users@xxxxxxxxxxxx Subject: FW: [Ethereal-users] mirrored/monitored/SPAN'd port not working The problem is that you are trying to mirror a trunked port. Try reading http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note 09186a008015c612.shtml Aaron -----Original Message----- From: Brandon Applegate [mailto:brandon@xxxxxxxx] Sent: Friday, September 12, 2003 9:07 AM To: Mike Kelley Cc: 'ethereal-users@xxxxxxxxxxxx' Subject: RE: [Ethereal-users] mirrored/monitored/SPAN'd port not working Hmm, do the interface stats on the switch side for f0/8 reflect f0/3 ? Also, have you tried tcpdump or any other machines to sniff with ? I.e. it looks like you have everything set up correctly. And not that I'm saying it should/would cause this, but I see eth0 and eth1 are in the same subnet, is this intended ? (is there a reason you can't use eth0:0 to run the IP that is on eth1) ? On Thu, 11 Sep 2003, Mike Kelley wrote: > This is what I get from "dmesg | grep promisc" & "ifconfig -a" eth0 > is the one currently plugged into a hub with the target but it is also > the interface I have used plugged into the FE 0/8 that is monitoring > FE 0/3 > > > <SNIP> > ! > interface FastEthernet0/3 > switchport trunk encapsulation dot1q > switchport trunk native vlan 11 > switchport mode trunk > switchport voice vlan 111 > ! > <SNIP> > ! > interface FastEthernet0/8 > port monitor FastEthernet0/3 > ! > <SNIP> > > Las_Cruces3524_1#sh port monitor > Monitor Port Port Being Monitored > --------------------- --------------------- > FastEthernet0/8 FastEthernet0/3 > > <SNIP> > > > > [spike@localhost spike]$ dmesg | grep promisc > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > device eth0 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > device eth0 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > device eth0 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > device eth0 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > device eth0 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > eth0: Setting promiscuous mode. > eth0: Setting promiscuous mode. > device eth0 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > eth0: Setting promiscuous mode. > eth0: Setting promiscuous mode. > eth0: Setting promiscuous mode. > eth0: Setting promiscuous mode. > device eth0 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > device eth0 left promiscuous mode > device eth1 entered promiscuous mode > device eth1 left promiscuous mode > eth0: Setting promiscuous mode. > device eth0 entered promiscuous mode > device eth0 left promiscuous mode > [spike@localhost spike]$ /sbin/ifconfig -a > cipsec0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 > BROADCAST MULTICAST MTU:1400 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > eth0 Link encap:Ethernet HWaddr 00:08:74: > inet addr:192.168.11.73 Bcast:192.168.11.255 > Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:576557 errors:0 dropped:0 overruns:0 frame:0 > TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:43357674 (41.3 Mb) TX bytes:7734 (7.5 Kb) > Interrupt:11 Base address:0xec80 > > eth1 Link encap:Ethernet HWaddr 00:40:05: > inet addr:192.168.11.81 Bcast:192.168.11.255 > Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:333129 errors:0 dropped:0 overruns:0 frame:0 > TX packets:124925 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:31761378 (30.2 Mb) TX bytes:12228323 (11.6 Mb) > Interrupt:11 Base address:0xb000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:565755 errors:0 dropped:0 overruns:0 frame:0 > TX packets:565755 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:38652246 (36.8 Mb) TX bytes:38652246 (36.8 Mb) > > [spike@localhost spike]$ /sbin/ifconfig eth0 -promisc > SIOCSIFFLAGS: Permission denied > [spike@localhost spike]$ su > Password: > [root@localhost spike]# /sbin/ifconfig eth0 promisc [root@localhost > spike]# /sbin/ifconfig eth1 promisc [root@localhost spike]# > /sbin/ifconfig -a > cipsec0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 > BROADCAST MULTICAST MTU:1400 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > eth0 Link encap:Ethernet HWaddr 00:08:74: > inet addr:192.168.11.73 Bcast:192.168.11.255 > Mask:255.255.255.0 > UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 > RX packets:577043 errors:0 dropped:0 overruns:0 frame:0 > TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:43394448 (41.3 Mb) TX bytes:7734 (7.5 Kb) > Interrupt:11 Base address:0xec80 > > -- Brandon Applegate - CCIE 10273 PGP Key fingerprint: 7407 DC86 AA7B A57F 62D1 A715 3C63 66A1 181E 6996 "SH1-0151. This is the serial number, of our orbital gun." _______________________________________________ Ethereal-users mailing list Ethereal-users@xxxxxxxxxxxx http://www.ethereal.com/mailman/listinfo/ethereal-users
- Prev by Date: FW: [Ethereal-users] mirrored/monitored/SPAN'd port not working
- Next by Date: [Ethereal-users] 0.9.15 compile error ( ld: fatal: entry point symbol `xport-dynamic' is undefined)
- Previous by thread: FW: [Ethereal-users] mirrored/monitored/SPAN'd port not working
- Next by thread: RE: [Ethereal-users] mirrored/monitored/SPAN'd port not working
- Index(es):