I have seen this with VPN software installed. If this is the case, try
going to the Network Connections and disabling (not removing) the VPN
software, re-start ethereal and see if this helps the situation.
Jim
-----Original Message-----
From: Guy Harris [mailto:guy@xxxxxxxxxxxx]
Sent: Thursday, July 31, 2003 1:59 PM
To: Martin Heldmann
Cc: ethereal-users@xxxxxxxxxxxx
Subject: Re: [Ethereal-users] Outgoing packets are not shown
On Thursday, July 31, 2003, at 3:34 AM, Martin Heldmann wrote:
> My question:
> I am using Ethereal at my home PC (and in the office).
> The home PC has three interfaces (dialup(PPP), USB-Wlan and PCI
> Ethernet card)
> I want use the Wlan interface for a packet sniffing.
>
> My problem is that only the incoming packets are shown and not the
> outgoing ones.
What operating system is the PC running Ethereal running?
If it's Windows, this is probably a WinPcap or driver problem, and you
should contact the WinPcap developers to find out whether anything can
be done. (It's probably a driver problem.)
If it's Linux or BSD, it's probably a driver problem, and you should
report it as a problem in the Linux distribution or BSD version you're
using.
_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users