Actually my situation is/was this - My external router is connected to my
Firewall with a crossover cable (mostly for security) - I'd like to put a
hub between them so I can attach a PC with Ethereal to do packet traces
between the two devices. I've tried using a Linksys 5-Port auto-sensing hub
(product # - EFAH05W), but apparently this is a switched hub and I can only
see broadcast traffic on the segment.
Jeffrey Threlfall
Sr. Network Administrator
Healthcare Automation
VOX - 401.691.3240
Email - JT@xxxxxxxxxxxxxxxxxxxxxxxxx
-----Original Message-----
From: COLIN Stéphane [mailto:scolin@xxxxxxxxxxxx]
Sent: Thursday, June 26, 2003 9:13 AM
To: 'ethereal-users@xxxxxxxxxxxx'
Subject: Re: [Ethereal-users] Looking for a new non-switched hub
Actually, before buying some device, maybe you can look on the
configuration of your switch if you can declare a dedicated port for
sniffing (working fine on cisco, hp, etc ...)
A++
J T wrote:
> Hi all - I'm doing some sniffs on my network and need to find a
> non-switched 10/100 hub (preferably non-auto sensing as well to
> eliminate any 'smarts' from the device) - Any suggestions?
>
> Jeffrey Threlfall
> Sr. Network Administrator
> Healthcare Automation
> VOX - 401.691.3240
> Email - JT@xxxxxxxxxxxxxxxxxxxxxxxxx
<mailto:hJT@xxxxxxxxxxxxxxxxxxxxxxxxx>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
--
------------------------------------------
COLIN Stephane, scolin at planetepc dot fr
------------------------------------------
_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users