Ethereal-users: RE: [Ethereal-users] Capturing a specific TCP port

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: "James R. Hendrick" <Jim_Hendrick@xxxxxxxxxxxxx>
Date: Wed, 16 Apr 2003 14:21:36 -0400
Title: Message
Hmmm, try lower-case
 
also, make sure the display filters (at the bottom of the ethereal window) are not preventing you from seeing the data
 
 
-----Original Message-----
From: Paul Santangelo [mailto:paul.santangelo@xxxxxxxxxxxxxxxxx]
Sent: Wednesday, April 16, 2003 12:32 PM
To: ethereal-users@xxxxxxxxxxxx
Subject: [Ethereal-users] Capturing a specific TCP port

Hello:
 
I'm kinda new to ethereal, I have used it many times in the past to get a sense of our network, but now I really need it to perform for me.
 
I need to capture packets that are sent to TCP PORT 10008.  I set up a capture filter just as you see it, I send the transmission but the get nothing in the capture.  Is there some setting that I could have wrong.  The interface I am using is the nic card in the machine, and not the ndis default.  When I remove the filter I do see the network traffic.
 
I'm not sure what I am doing wrong.
 
Does anyone have a suggestion?  
 

Best Regards!

Paul Santangelo, CNE
Konica Business Technologies
500 Day Hill RD
Windsor, CT 06095

Tel:  800.825.5664
Fax: 860.902.7643