Ethereal-users: [Ethereal-users] Cannot compile ethereal under RH 8.0
Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.
From: Paolo Galtieri <paolo.galtieri@xxxxxxxxxxxx>
Date: Mon, 09 Dec 2002 11:41:05 -0700
I just down loaded ethereal 0.9.8 and I could not get it to compile
under RedHat 8.0. I used the following configure line:
./configure --prefix=/usr \ --mandir=/usr/share/man \ --sysconfdir=/etc/ethereal \ --enable-zlib \ --enable-ipv6 \ --enable-snmp \ --with-net-snmp \ --enable-pcap \ --with-gnu-ld \ --disable-static \ --disable-usr-local \ --with-plugindir=/usr/lib/ethereal/plugins/0.9.8 When I compile it I get the following error:gcc -DHAVE_CONFIG_H -I. -I. -I. -I/usr/include/rpm -DINET6 -O2 -march=i386 -mcpu=i686 -Dlinux -I/usr/include/rpm -DINET6 -D_U_="__attribute__((unused))" -Wall -W -g -O2 -I. -I./wiretap -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include -I/usr/include/rpm -DINET6 -O2 -march=i386 -mcpu=i686 -Dlinux -I/usr/include/rpm -c `test -f 'packet-snmp.c' || echo './'`packet-snmp.c
packet-snmp.c:154:1: warning: "SNMP_MSG_GET" redefined In file included from /usr/include/net-snmp/definitions.h:25, from /usr/include/net-snmp/types.h:52, from /usr/include/net-snmp/mib_api.h:8, from packet-snmp.c:60:/usr/include/net-snmp/library/snmp.h:114:1: warning: this is the location of the previous definition
packet-snmp.c:155:1: warning: "SNMP_MSG_GETNEXT" redefined/usr/include/net-snmp/library/snmp.h:115:1: warning: this is the location of the previous definition
packet-snmp.c:156:1: warning: "SNMP_MSG_RESPONSE" redefined/usr/include/net-snmp/library/snmp.h:116:1: warning: this is the location of the previous definition
packet-snmp.c:157:1: warning: "SNMP_MSG_SET" redefined/usr/include/net-snmp/library/snmp.h:117:1: warning: this is the location of the previous definition
packet-snmp.c:158:1: warning: "SNMP_MSG_TRAP" redefined/usr/include/net-snmp/library/snmp.h:122:1: warning: this is the location of the previous definition
packet-snmp.c:160:1: warning: "SNMP_MSG_GETBULK" redefined/usr/include/net-snmp/library/snmp.h:127:1: warning: this is the location of the previous definition
packet-snmp.c:161:1: warning: "SNMP_MSG_INFORM" redefined/usr/include/net-snmp/library/snmp.h:128:1: warning: this is the location of the previous definition
packet-snmp.c:162:1: warning: "SNMP_MSG_TRAP2" redefined/usr/include/net-snmp/library/snmp.h:129:1: warning: this is the location of the previous definition
packet-snmp.c:163:1: warning: "SNMP_MSG_REPORT" redefined/usr/include/net-snmp/library/snmp.h:134:1: warning: this is the location of the previous definition
packet-snmp.c:240:1: warning: "SNMP_ERR_NOERROR" redefined/usr/include/net-snmp/library/snmp.h:169:1: warning: this is the location of the previous definition
packet-snmp.c:241:1: warning: "SNMP_ERR_TOOBIG" redefined/usr/include/net-snmp/library/snmp.h:170:1: warning: this is the location of the previous definition
packet-snmp.c:242:1: warning: "SNMP_ERR_NOSUCHNAME" redefined/usr/include/net-snmp/library/snmp.h:171:1: warning: this is the location of the previous definition
packet-snmp.c:243:1: warning: "SNMP_ERR_BADVALUE" redefined/usr/include/net-snmp/library/snmp.h:172:1: warning: this is the location of the previous definition
packet-snmp.c:244:1: warning: "SNMP_ERR_READONLY" redefined/usr/include/net-snmp/library/snmp.h:173:1: warning: this is the location of the previous definition
packet-snmp.c:247:1: warning: "SNMP_ERR_NOACCESS" redefined/usr/include/net-snmp/library/snmp.h:179:1: warning: this is the location of the previous definition
packet-snmp.c:248:1: warning: "SNMP_ERR_WRONGTYPE" redefined/usr/include/net-snmp/library/snmp.h:180:1: warning: this is the location of the previous definition
packet-snmp.c:249:1: warning: "SNMP_ERR_WRONGLENGTH" redefined/usr/include/net-snmp/library/snmp.h:181:1: warning: this is the location of the previous definition
packet-snmp.c:250:1: warning: "SNMP_ERR_WRONGENCODING" redefined/usr/include/net-snmp/library/snmp.h:182:1: warning: this is the location of the previous definition
packet-snmp.c:251:1: warning: "SNMP_ERR_WRONGVALUE" redefined/usr/include/net-snmp/library/snmp.h:183:1: warning: this is the location of the previous definition
packet-snmp.c:252:1: warning: "SNMP_ERR_NOCREATION" redefined/usr/include/net-snmp/library/snmp.h:184:1: warning: this is the location of the previous definition
packet-snmp.c:253:1: warning: "SNMP_ERR_INCONSISTENTVALUE" redefined/usr/include/net-snmp/library/snmp.h:185:1: warning: this is the location of the previous definition
packet-snmp.c:254:1: warning: "SNMP_ERR_RESOURCEUNAVAILABLE" redefined/usr/include/net-snmp/library/snmp.h:186:1: warning: this is the location of the previous definition
packet-snmp.c:255:1: warning: "SNMP_ERR_COMMITFAILED" redefined/usr/include/net-snmp/library/snmp.h:187:1: warning: this is the location of the previous definition
packet-snmp.c:256:1: warning: "SNMP_ERR_UNDOFAILED" redefined/usr/include/net-snmp/library/snmp.h:188:1: warning: this is the location of the previous definition
packet-snmp.c:257:1: warning: "SNMP_ERR_AUTHORIZATIONERROR" redefined/usr/include/net-snmp/library/snmp.h:189:1: warning: this is the location of the previous definition
packet-snmp.c:258:1: warning: "SNMP_ERR_NOTWRITABLE" redefined/usr/include/net-snmp/library/snmp.h:190:1: warning: this is the location of the previous definition
packet-snmp.c:259:1: warning: "SNMP_ERR_INCONSISTENTNAME" redefined/usr/include/net-snmp/library/snmp.h:195:1: warning: this is the location of the previous definition
packet-snmp.c:286:1: warning: "SNMP_TRAP_COLDSTART" redefined/usr/include/net-snmp/library/snmp.h:203:1: warning: this is the location of the previous definition
packet-snmp.c:287:1: warning: "SNMP_TRAP_WARMSTART" redefined/usr/include/net-snmp/library/snmp.h:204:1: warning: this is the location of the previous definition
packet-snmp.c:288:1: warning: "SNMP_TRAP_LINKDOWN" redefined/usr/include/net-snmp/library/snmp.h:205:1: warning: this is the location of the previous definition
packet-snmp.c:289:1: warning: "SNMP_TRAP_LINKUP" redefined/usr/include/net-snmp/library/snmp.h:206:1: warning: this is the location of the previous definition
packet-snmp.c:290:1: warning: "SNMP_TRAP_AUTHFAIL" redefined/usr/include/net-snmp/library/snmp.h:207:1: warning: this is the location of the previous definition
packet-snmp.c:291:1: warning: "SNMP_TRAP_EGPNEIGHBORLOSS" redefined/usr/include/net-snmp/library/snmp.h:208:1: warning: this is the location of the previous definition
packet-snmp.c:292:1: warning: "SNMP_TRAP_ENTERPRISESPECIFIC" redefined/usr/include/net-snmp/library/snmp.h:209:1: warning: this is the location of the previous definition
packet-snmp.c:354:1: warning: "SNMP_NOSUCHOBJECT" redefined/usr/include/net-snmp/library/snmp.h:158:1: warning: this is the location of the previous definition
packet-snmp.c:355:1: warning: "SNMP_NOSUCHINSTANCE" redefined/usr/include/net-snmp/library/snmp.h:159:1: warning: this is the location of the previous definition
packet-snmp.c:356:1: warning: "SNMP_ENDOFMIBVIEW" redefined/usr/include/net-snmp/library/snmp.h:160:1: warning: this is the location of the previous definition
packet-snmp.c: In function `proto_register_snmp':packet-snmp.c:2063: warning: implicit declaration of function `netsnmp_ds_set_boolean' packet-snmp.c:2063: `NETSNMP_DS_LIBRARY_ID' undeclared (first use in this function)
packet-snmp.c:2063: (Each undeclared identifier is reported only once packet-snmp.c:2063: for each function it appears in.)packet-snmp.c:2064: `NETSNMP_DS_LIB_NO_TOKEN_WARNINGS' undeclared (first use in
this function)packet-snmp.c:2065: warning: implicit declaration of function `netsnmp_ds_set_int' packet-snmp.c:2066: `NETSNMP_DS_LIB_PRINT_SUFFIX_ONLY' undeclared (first use in
this function) make[2]: *** [packet-snmp.o] Error 1 make[2]: Leaving directory `/source/ethereal-0.9.8' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/source/ethereal-0.9.8' make: *** [all] Error 2 The config.status file is attached. Obviously I can fix it by adding the define, but I shouldn't have to. Any help is appreciated. Thanks Paolo
#! /bin/sh # Generated by configure. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false SHELL=${CONFIG_SHELL-/bin/sh} ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && { $as_unset LANG || test "${LANG+set}" != set; } || { LANG=C; export LANG; } (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || { LC_ALL=C; export LC_ALL; } (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || { LC_TIME=C; export LC_TIME; } (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || { LC_CTYPE=C; export LC_CTYPE; } (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || { LANGUAGE=C; export LANGUAGE; } (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || { LC_COLLATE=C; export LC_COLLATE; } (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || { LC_NUMERIC=C; export LC_NUMERIC; } (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conftest.sh echo "exit 0" >>conftest.sh chmod +x conftest.sh if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conftest.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" # Sed expression to map a string onto a valid variable name. as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by $as_me, which was generated by GNU Autoconf 2.53. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 config_files=" Makefile doc/Makefile gtk/Makefile packaging/Makefile packaging/nsis/Makefile packaging/rpm/Makefile packaging/rpm/SPECS/Makefile packaging/rpm/SPECS/ethereal.spec packaging/svr4/Makefile packaging/svr4/checkinstall packaging/svr4/pkginfo plugins/Makefile plugins/docsis/Makefile plugins/giop/Makefile plugins/gryphon/Makefile plugins/mgcp/Makefile plugins/pcli/Makefile tools/Makefile tools/lemon/Makefile" config_headers=" config.h" config_commands=" depfiles" ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to <bug-autoconf@xxxxxxx>." ac_cs_version="\ config.status configured by ./configure, generated by GNU Autoconf 2.53, with options \"'--prefix=/usr' '--mandir=/usr/share/man' '--sysconfdir=/etc/ethereal' '--enable-gtk2' '--enable-zlib' '--enable-ipv6' '--enable-snmp' '--with-net-snmp' '--enable-pcap' '--with-gnu-ld' '--disable-static' '--disable-usr-local' '--with-plugindir=/usr/lib/ethereal/plugins/0.9.8'\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=. INSTALL="/usr/bin/install -c" # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` shift set dummy "$ac_option" "$ac_optarg" ${1+"$@"} shift ;; -*);; *) # This is not an option, so the user has probably given explicit # arguments. ac_need_defaults=false;; esac case $1 in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running /bin/sh ./configure " '--prefix=/usr' '--mandir=/usr/share/man' '--sysconfdir=/etc/ethereal' '--enable-gtk2' '--enable-zlib' '--enable-ipv6' '--enable-snmp' '--with-net-snmp' '--enable-pcap' '--with-gnu-ld' '--disable-static' '--disable-usr-local' '--with-plugindir=/usr/lib/ethereal/plugins/0.9.8' " --no-create --no-recursion" exec /bin/sh ./configure '--prefix=/usr' '--mandir=/usr/share/man' '--sysconfdir=/etc/ethereal' '--enable-gtk2' '--enable-zlib' '--enable-ipv6' '--enable-snmp' '--with-net-snmp' '--enable-pcap' '--with-gnu-ld' '--disable-static' '--disable-usr-local' '--with-plugindir=/usr/lib/ethereal/plugins/0.9.8' --no-create --no-recursion ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) shift CONFIG_FILES="$CONFIG_FILES $1" ac_need_defaults=false;; --header | --heade | --head | --hea ) shift CONFIG_HEADERS="$CONFIG_HEADERS $1" ac_need_defaults=false;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done # # INIT-COMMANDS section. # AMDEP_TRUE="" ac_aux_dir="." for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "gtk/Makefile" ) CONFIG_FILES="$CONFIG_FILES gtk/Makefile" ;; "packaging/Makefile" ) CONFIG_FILES="$CONFIG_FILES packaging/Makefile" ;; "packaging/nsis/Makefile" ) CONFIG_FILES="$CONFIG_FILES packaging/nsis/Makefile" ;; "packaging/rpm/Makefile" ) CONFIG_FILES="$CONFIG_FILES packaging/rpm/Makefile" ;; "packaging/rpm/SPECS/Makefile" ) CONFIG_FILES="$CONFIG_FILES packaging/rpm/SPECS/Makefile" ;; "packaging/rpm/SPECS/ethereal.spec" ) CONFIG_FILES="$CONFIG_FILES packaging/rpm/SPECS/ethereal.spec" ;; "packaging/svr4/Makefile" ) CONFIG_FILES="$CONFIG_FILES packaging/svr4/Makefile" ;; "packaging/svr4/checkinstall" ) CONFIG_FILES="$CONFIG_FILES packaging/svr4/checkinstall" ;; "packaging/svr4/pkginfo" ) CONFIG_FILES="$CONFIG_FILES packaging/svr4/pkginfo" ;; "plugins/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/Makefile" ;; "plugins/docsis/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/docsis/Makefile" ;; "plugins/giop/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/giop/Makefile" ;; "plugins/gryphon/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/gryphon/Makefile" ;; "plugins/mgcp/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/mgcp/Makefile" ;; "plugins/pcli/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/pcli/Makefile" ;; "tools/Makefile" ) CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; "tools/lemon/Makefile" ) CONFIG_FILES="$CONFIG_FILES tools/lemon/Makefile" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. : ${TMPDIR=/tmp} { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=$TMPDIR/cs$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 { (exit 1); exit 1; } } # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF s,@SHELL@,/bin/sh,;t t s,@PATH_SEPARATOR@,:,;t t s,@PACKAGE_NAME@,,;t t s,@PACKAGE_TARNAME@,,;t t s,@PACKAGE_VERSION@,,;t t s,@PACKAGE_STRING@,,;t t s,@PACKAGE_BUGREPORT@,,;t t s,@exec_prefix@,${prefix},;t t s,@prefix@,/usr,;t t s,@program_transform_name@,s,x,x,,;t t s,@bindir@,${exec_prefix}/bin,;t t s,@sbindir@,${exec_prefix}/sbin,;t t s,@libexecdir@,${exec_prefix}/libexec,;t t s,@datadir@,${prefix}/share,;t t s,@sysconfdir@,/etc/ethereal,;t t s,@sharedstatedir@,${prefix}/com,;t t s,@localstatedir@,${prefix}/var,;t t s,@libdir@,${exec_prefix}/lib,;t t s,@includedir@,${prefix}/include,;t t s,@oldincludedir@,/usr/include,;t t s,@infodir@,${prefix}/info,;t t s,@mandir@,/usr/share/man,;t t s,@build_alias@,,;t t s,@host_alias@,,;t t s,@target_alias@,,;t t s,@DEFS@,-DHAVE_CONFIG_H,;t t s,@ECHO_C@,,;t t s,@ECHO_N@,-n,;t t s,@ECHO_T@,,;t t s,@LIBS@,-lz ,;t t s,@build@,i686-pc-linux-gnu,;t t s,@build_cpu@,i686,;t t s,@build_vendor@,pc,;t t s,@build_os@,linux-gnu,;t t s,@host@,i686-pc-linux-gnu,;t t s,@host_cpu@,i686,;t t s,@host_vendor@,pc,;t t s,@host_os@,linux-gnu,;t t s,@target@,i686-pc-linux-gnu,;t t s,@target_cpu@,i686,;t t s,@target_vendor@,pc,;t t s,@target_os@,linux-gnu,;t t s,@INSTALL_PROGRAM@,${INSTALL},;t t s,@INSTALL_SCRIPT@,${INSTALL},;t t s,@INSTALL_DATA@,${INSTALL} -m 644,;t t s,@PACKAGE@,ethereal,;t t s,@VERSION@,0.9.8,;t t s,@ACLOCAL@,${SHELL} /source/ethereal-0.9.8/missing --run aclocal-1.6,;t t s,@AUTOCONF@,${SHELL} /source/ethereal-0.9.8/missing --run autoconf,;t t s,@AUTOMAKE@,${SHELL} /source/ethereal-0.9.8/missing --run automake-1.6,;t t s,@AUTOHEADER@,${SHELL} /source/ethereal-0.9.8/missing --run autoheader,;t t s,@MAKEINFO@,${SHELL} /source/ethereal-0.9.8/missing --run makeinfo,;t t s,@AMTAR@,${SHELL} /source/ethereal-0.9.8/missing --run tar,;t t s,@install_sh@,/source/ethereal-0.9.8/install-sh,;t t s,@STRIP@,strip,;t t s,@ac_ct_STRIP@,strip,;t t s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t s,@AWK@,gawk,;t t s,@SET_MAKE@,,;t t s,@CC@,gcc,;t t s,@CFLAGS@,-DINET6 -D_U_="__attribute__((unused))" -Wall -W -g -O2 -I$(top_srcdir) -I$(top_srcdir)/wiretap -D_REENTRANT -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/Xft2 -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/rpm -DINET6 -O2 -march=i386 -mcpu=i686 -Dlinux -I/usr/include/rpm,;t t s,@LDFLAGS@,,;t t s,@CPPFLAGS@, -I/usr/include/rpm -DINET6 -O2 -march=i386 -mcpu=i686 -Dlinux -I/usr/include/rpm,;t t s,@ac_ct_CC@,gcc,;t t s,@EXEEXT@,,;t t s,@OBJEXT@,o,;t t s,@DEPDIR@,.deps,;t t s,@am__include@,include,;t t s,@am__quote@,,;t t s,@AMDEP_TRUE@,,;t t s,@AMDEP_FALSE@,#,;t t s,@AMDEPBACKSLASH@,\,;t t s,@CCDEPMODE@,depmode=gcc3,;t t s,@CPP@,gcc -E,;t t s,@LN_S@,ln -s,;t t s,@ECHO@,echo,;t t s,@RANLIB@,ranlib,;t t s,@ac_ct_RANLIB@,ranlib,;t t s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool,;t t s,@YACC@,bison -y,;t t s,@LEX@,/usr/bin/flex,;t t s,@LEXLIB@,-lfl,;t t s,@LEX_OUTPUT_ROOT@,lex.yy,;t t s,@PERL@,/usr/bin/perl,;t t s,@POD2MAN@,/usr/bin/pod2man,;t t s,@PYTHON@,/usr/bin/python,;t t s,@HAVE_PKGPROTO@,no,;t t s,@HAVE_PKGMK@,no,;t t s,@HAVE_PKGTRANS@,no,;t t s,@HAVE_SVR4_PACKAGING@,no,;t t s,@ac_cv_ethereal_have_rpm@,yes,;t t s,@HAVE_RPM@,yes,;t t s,@DATAFILE_DIR@,/etc/ethereal,;t t s,@USE_GTK2_TRUE@,,;t t s,@USE_GTK2_FALSE@,#,;t t s,@PKG_CONFIG@,/usr/bin/pkg-config,;t t s,@GTK_CFLAGS@, -D_REENTRANT -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/Xft2 -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ,;t t s,@GTK_LIBS@, -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lgthread-2.0 -lpthread -lglib-2.0 ,;t t s,@GTK_CONFIG@,,;t t s,@GLIB_CFLAGS@, -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ,;t t s,@GLIB_LIBS@, -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ,;t t s,@GLIB_GENMARSHAL@,glib-genmarshal,;t t s,@GOBJECT_QUERY@,gobject-query,;t t s,@GLIB_MKENUMS@,glib-mkenums,;t t s,@GLIB_CONFIG@,,;t t s,@ethereal_bin@,ethereal,;t t s,@ethereal_man@,ethereal.1,;t t s,@tethereal_bin@,tethereal,;t t s,@tethereal_man@,tethereal.1,;t t s,@editcap_bin@,editcap,;t t s,@editcap_man@,editcap.1,;t t s,@mergecap_bin@,mergecap,;t t s,@mergecap_man@,mergecap.1,;t t s,@text2pcap_bin@,text2pcap,;t t s,@text2pcap_man@,text2pcap.1,;t t s,@idl2eth_bin@,idl2eth,;t t s,@idl2eth_man@,idl2eth.1,;t t s,@dftest_bin@,,;t t s,@randpkt_bin@,,;t t s,@NSL_LIBS@,,;t t s,@SOCKET_LIBS@,,;t t s,@PCAP_LIBS@,-lpcap,;t t s,@SETUID_INSTALL_TRUE@,#,;t t s,@SETUID_INSTALL_FALSE@,,;t t s,@SSL_LIBS@,-lcrypto,;t t s,@NETSNMPCONFIG@,/usr/bin/net-snmp-config,;t t s,@SNMP_LIBS@,-L/usr/lib -lnetsnmp -lcrypto -lm,;t t s,@SNPRINTF_C@,,;t t s,@SNPRINTF_O@,,;t t s,@STRERROR_C@,,;t t s,@STRERROR_O@,,;t t s,@STRCASECMP_C@,,;t t s,@STRCASECMP_O@,,;t t s,@STRNCASECMP_C@,,;t t s,@STRNCASECMP_O@,,;t t s,@MKSTEMP_C@,,;t t s,@MKSTEMP_O@,,;t t s,@STRPTIME_C@,,;t t s,@STRPTIME_O@,,;t t s,@ethereal_SUBDIRS@,gtk,;t t s,@HAVE_PLUGINS_TRUE@,,;t t s,@HAVE_PLUGINS_FALSE@,#,;t t s,@PLUGIN_DIR@,/usr/lib/ethereal/plugins/0.9.8,;t t s,@plugindir@,${exec_prefix}/lib/ethereal/plugins/0.9.8,;t t s,@LIBTOOL_DEPS@,./ltmain.sh,;t t s,@subdirs@, epan wiretap,;t t CEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { case "$ac_dir" in [\\/]* | ?:[\\/]* ) as_incr_dir=;; *) as_incr_dir=.;; esac as_dummy="$ac_dir" for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do case $as_mkdir_dir in # Skip DOS drivespec ?:) as_incr_dir=$as_mkdir_dir ;; *) as_incr_dir=$as_incr_dir/$as_mkdir_dir test -d "$as_incr_dir" || mkdir "$as_incr_dir" || { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; } ;; esac done; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; *) # Relative if test -f "$f"; then # Build tree echo $f elif test -f "$srcdir/$f"; then # Source tree echo $srcdir/$f else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } sed "/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; } :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done # # CONFIG_HEADER section. # # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; *) # Relative if test -f "$f"; then # Build tree echo $f elif test -f "$srcdir/$f"; then # Source tree echo $srcdir/$f else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. sed 's/[ ]*$//' $ac_file_inputs >$tmp/in # Handle all the #define templates only if necessary. if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then # If there are no defines, we may have an empty if/fi : cat >$tmp/defines.sed <<CEOF /^[ ]*#[ ]*define/!b t clr : clr ${ac_dA}PACKAGE_NAME${ac_dB}PACKAGE_NAME${ac_dC}""${ac_dD} ${ac_dA}PACKAGE_TARNAME${ac_dB}PACKAGE_TARNAME${ac_dC}""${ac_dD} ${ac_dA}PACKAGE_VERSION${ac_dB}PACKAGE_VERSION${ac_dC}""${ac_dD} ${ac_dA}PACKAGE_STRING${ac_dB}PACKAGE_STRING${ac_dC}""${ac_dD} ${ac_dA}PACKAGE_BUGREPORT${ac_dB}PACKAGE_BUGREPORT${ac_dC}""${ac_dD} ${ac_dA}PACKAGE${ac_dB}PACKAGE${ac_dC}"ethereal"${ac_dD} ${ac_dA}VERSION${ac_dB}VERSION${ac_dC}"0.9.8"${ac_dD} ${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_STAT_H${ac_dB}HAVE_SYS_STAT_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_STRING_H${ac_dB}HAVE_STRING_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_MEMORY_H${ac_dB}HAVE_MEMORY_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_STRINGS_H${ac_dB}HAVE_STRINGS_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_INTTYPES_H${ac_dB}HAVE_INTTYPES_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_DLFCN_H${ac_dB}HAVE_DLFCN_H${ac_dC}1${ac_dD} ${ac_dA}YYTEXT_POINTER${ac_dB}YYTEXT_POINTER${ac_dC}1${ac_dD} ${ac_dA}DATAFILE_DIR${ac_dB}DATAFILE_DIR${ac_dC}"/etc/ethereal"${ac_dD} ${ac_dA}HAVE_LIBPCAP${ac_dB}HAVE_LIBPCAP${ac_dC}1${ac_dD} ${ac_dA}HAVE_PCAP_VERSION${ac_dB}HAVE_PCAP_VERSION${ac_dC}1${ac_dD} ${ac_dA}HAVE_LIBZ${ac_dB}HAVE_LIBZ${ac_dC}1${ac_dD} ${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD} ${ac_dA}HAVE_FCNTL_H${ac_dB}HAVE_FCNTL_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_IOCTL_H${ac_dB}HAVE_SYS_IOCTL_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_TIME_H${ac_dB}HAVE_SYS_TIME_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_STDARG_H${ac_dB}HAVE_STDARG_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_NETDB_H${ac_dB}HAVE_NETDB_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_STAT_H${ac_dB}HAVE_SYS_STAT_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_SOCKET_H${ac_dB}HAVE_SYS_SOCKET_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_SYS_WAIT_H${ac_dB}HAVE_SYS_WAIT_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_NETINET_IN_H${ac_dB}HAVE_NETINET_IN_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_STDDEF_H${ac_dB}HAVE_STDDEF_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_ARPA_INET_H${ac_dB}HAVE_ARPA_INET_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_ICONV_H${ac_dB}HAVE_ICONV_H${ac_dC}1${ac_dD} CEOF sed -f $tmp/defines.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <<CEOF /^[ ]*#[ ]*define/!b t clr : clr ${ac_dA}HAVE_NET_SNMP_NET_SNMP_CONFIG_H${ac_dB}HAVE_NET_SNMP_NET_SNMP_CONFIG_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_NET_SNMP_LIBRARY_DEFAULT_STORE_H${ac_dB}HAVE_NET_SNMP_LIBRARY_DEFAULT_STORE_H${ac_dC}1${ac_dD} ${ac_dA}HAVE_NET_SNMP${ac_dB}HAVE_NET_SNMP${ac_dC}1${ac_dD} ${ac_dA}HAVE_GETPROTOBYNUMBER${ac_dB}HAVE_GETPROTOBYNUMBER${ac_dC}1${ac_dD} ${ac_dA}HAVE_GETHOSTBYNAME2${ac_dB}HAVE_GETHOSTBYNAME2${ac_dC}1${ac_dD} ${ac_dA}HAVE_PLUGINS${ac_dB}HAVE_PLUGINS${ac_dC}1${ac_dD} ${ac_dA}PLUGIN_DIR${ac_dB}PLUGIN_DIR${ac_dC}"/usr/lib/ethereal/plugins/0.9.8"${ac_dD} CEOF sed -f $tmp/defines.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in fi # egrep # Handle all the #undef templates cat >$tmp/undefs.sed <<CEOF /^[ ]*#[ ]*undef/!b t clr : clr ${ac_uA}PACKAGE_NAME${ac_uB}PACKAGE_NAME${ac_uC}""${ac_uD} ${ac_uA}PACKAGE_TARNAME${ac_uB}PACKAGE_TARNAME${ac_uC}""${ac_uD} ${ac_uA}PACKAGE_VERSION${ac_uB}PACKAGE_VERSION${ac_uC}""${ac_uD} ${ac_uA}PACKAGE_STRING${ac_uB}PACKAGE_STRING${ac_uC}""${ac_uD} ${ac_uA}PACKAGE_BUGREPORT${ac_uB}PACKAGE_BUGREPORT${ac_uC}""${ac_uD} ${ac_uA}PACKAGE${ac_uB}PACKAGE${ac_uC}"ethereal"${ac_uD} ${ac_uA}VERSION${ac_uB}VERSION${ac_uC}"0.9.8"${ac_uD} ${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_STAT_H${ac_uB}HAVE_SYS_STAT_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_STDLIB_H${ac_uB}HAVE_STDLIB_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_STRING_H${ac_uB}HAVE_STRING_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_MEMORY_H${ac_uB}HAVE_MEMORY_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_STRINGS_H${ac_uB}HAVE_STRINGS_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_INTTYPES_H${ac_uB}HAVE_INTTYPES_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_STDINT_H${ac_uB}HAVE_STDINT_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_DLFCN_H${ac_uB}HAVE_DLFCN_H${ac_uC}1${ac_uD} ${ac_uA}YYTEXT_POINTER${ac_uB}YYTEXT_POINTER${ac_uC}1${ac_uD} ${ac_uA}DATAFILE_DIR${ac_uB}DATAFILE_DIR${ac_uC}"/etc/ethereal"${ac_uD} ${ac_uA}HAVE_LIBPCAP${ac_uB}HAVE_LIBPCAP${ac_uC}1${ac_uD} ${ac_uA}HAVE_PCAP_VERSION${ac_uB}HAVE_PCAP_VERSION${ac_uC}1${ac_uD} ${ac_uA}HAVE_LIBZ${ac_uB}HAVE_LIBZ${ac_uC}1${ac_uD} ${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD} ${ac_uA}HAVE_FCNTL_H${ac_uB}HAVE_FCNTL_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_IOCTL_H${ac_uB}HAVE_SYS_IOCTL_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_TIME_H${ac_uB}HAVE_SYS_TIME_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_STDARG_H${ac_uB}HAVE_STDARG_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_NETDB_H${ac_uB}HAVE_NETDB_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_STAT_H${ac_uB}HAVE_SYS_STAT_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_SOCKET_H${ac_uB}HAVE_SYS_SOCKET_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_SYS_WAIT_H${ac_uB}HAVE_SYS_WAIT_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_NETINET_IN_H${ac_uB}HAVE_NETINET_IN_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_STDDEF_H${ac_uB}HAVE_STDDEF_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_ARPA_INET_H${ac_uB}HAVE_ARPA_INET_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_ICONV_H${ac_uB}HAVE_ICONV_H${ac_uC}1${ac_uD} CEOF sed -f $tmp/undefs.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <<CEOF /^[ ]*#[ ]*undef/!b t clr : clr ${ac_uA}HAVE_NET_SNMP_NET_SNMP_CONFIG_H${ac_uB}HAVE_NET_SNMP_NET_SNMP_CONFIG_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_NET_SNMP_LIBRARY_DEFAULT_STORE_H${ac_uB}HAVE_NET_SNMP_LIBRARY_DEFAULT_STORE_H${ac_uC}1${ac_uD} ${ac_uA}HAVE_NET_SNMP${ac_uB}HAVE_NET_SNMP${ac_uC}1${ac_uD} ${ac_uA}HAVE_GETPROTOBYNUMBER${ac_uB}HAVE_GETPROTOBYNUMBER${ac_uC}1${ac_uD} ${ac_uA}HAVE_GETHOSTBYNAME2${ac_uB}HAVE_GETHOSTBYNAME2${ac_uC}1${ac_uD} ${ac_uA}HAVE_PLUGINS${ac_uB}HAVE_PLUGINS${ac_uC}1${ac_uD} ${ac_uA}PLUGIN_DIR${ac_uB}PLUGIN_DIR${ac_uC}"/usr/lib/ethereal/plugins/0.9.8"${ac_uD} s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, CEOF sed -f $tmp/undefs.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then echo "/* Generated by configure. */" >$tmp/config.h else echo "/* $ac_file. Generated by configure. */" >$tmp/config.h fi cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then if cmp -s $ac_file $tmp/config.h 2>/dev/null; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { case "$ac_dir" in [\\/]* | ?:[\\/]* ) as_incr_dir=;; *) as_incr_dir=.;; esac as_dummy="$ac_dir" for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do case $as_mkdir_dir in # Skip DOS drivespec ?:) as_incr_dir=$as_mkdir_dir ;; *) as_incr_dir=$as_incr_dir/$as_mkdir_dir test -d "$as_incr_dir" || mkdir "$as_incr_dir" || { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; } ;; esac done; } rm -f $ac_file mv $tmp/config.h $ac_file fi else cat $tmp/config.h rm -f $tmp/config.h fi # Run the commands associated with the file. case $ac_file in config.h ) # update the timestamp echo 'timestamp for config.h' >"./stamp-h1" ;; esac done # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`(dirname "$mf") 2>/dev/null || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` else continue fi grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue # Extract the definition of DEP_FILES from the Makefile without # running `make'. DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n -e '/^U = / s///p' < "$mf"` test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" # We invoke sed twice because it is the simplest approach to # changing $(DEPDIR) to its actual value in the expansion. for file in `sed -n -e ' /^DEP_FILES = .*\\\\$/ { s/^DEP_FILES = // :loop s/\\\\$// p n /\\\\$/ b loop p } /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`(dirname "$file") 2>/dev/null || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { case $dirpart/$fdir in [\\/]* | ?:[\\/]* ) as_incr_dir=;; *) as_incr_dir=.;; esac as_dummy=$dirpart/$fdir for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do case $as_mkdir_dir in # Skip DOS drivespec ?:) as_incr_dir=$as_mkdir_dir ;; *) as_incr_dir=$as_incr_dir/$as_mkdir_dir test -d "$as_incr_dir" || mkdir "$as_incr_dir" || { { echo "$as_me:$LINENO: error: cannot create $dirpart/$fdir" >&5 echo "$as_me: error: cannot create $dirpart/$fdir" >&2;} { (exit 1); exit 1; }; } ;; esac done; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done { (exit 0); exit 0; }
- Prev by Date: RE: [Ethereal-users] unsupported Ethernet type 10
- Next by Date: [Ethereal-users] A question for you...
- Previous by thread: [Ethereal-users] Ethereal 0.9.8 Win32 and SNMP MIBs
- Next by thread: [Ethereal-users] A question for you...
- Index(es):