["Jeremy Hein" <jeremyh@xxxxxxxxxxxxxxxx>]

Thank you for responding so quickly.  I wish my problem was that simple and
it probably is, but after I use the echo request, I do a more on the file
and nothing has changed.  Although I can change the modes with iwconfig to
"Repeater, Ad-Hoc, Manager," I cannot change to "Monitor" which I'm guessing
is what I need.  Anyone have any other suggestions?

Jeremy

----- Original Message -----
From: "Guy Harris" <guy@xxxxxxxxxx>
To: "Jeremy Hein" <jeremy.hein@xxxxxxxx>
Cc: <ethereal-users@xxxxxxxxxxxx>
Sent: Wednesday, October 16, 2002 5:10 PM
Subject: Re: [Ethereal-users] Redhat Linux 8.0 and Cisco Aironet


On Wed, Oct 16, 2002 at 11:45:23AM -0400, Jeremy Hein wrote:
> I just installed Redhat Linux 8.0 and am trying to figure out how to see
> 802.11 air traffic with Ethereal. I've looked at multiple faqs and tried
> reinstalling pcmcia drivers and aironet drivers and I've got the client
> working and the card is working, but I don't know how to get Ethereal to
> see the 802.11 traffic. I would like to do this without recompiling the
> kernel since I still cannot handle that. Please be precise in your
> answer, since I have tried several web sites and solutions.

If the instructions in the Ethereal FAQ:

http://www.ethereal.com/faq.html#q5.24

don't work (the stuff involving sending stuff to
"/proc/driver/aironet/ethN/Config" with the "echo" command), then I have
no idea what the problem is, unless RH 8.0 has an old driver that
doesn't work.