Hello
In the start capture window, I only fill out filters to sort out the packets
that come from or goto a certain host (E.e. host 198.162.10.2 ||
198.162.20.3 || ...)
When I want to see only the H225 traffic, I fill out the filterbox in the
general Ethereal window (at the bottom, to the left. There is a "reset" and
"apply" button next to it); just put h225 there, and you will only see these
packets.
So, don't use the filter box in the "Capture --> start" window, use the
regular filter box in the main ethereal window.
Kind regards,
Vaya Willemen.
-----Original Message-----
From: vhatz@xxxxxxx [mailto:vhatz@xxxxxxx]
Sent: woensdag 24 juli 2002 15:59
To: ethereal-users@xxxxxxxxxxxx
Subject: [Ethereal-users] Capture Filters for Ethereal on Windows
Hello,
I'm new to the list and I don't know if this question
has been posted & answered before. If it has been
answered, could you please guide me to the proper
resource?
I am using Ethereal on Windows to capture H.323
traffic. I am having problems with the syntax of
filtering commands. For example, if I want to monitor
all messages of the H.225 protocol, should I use:
proto h225
in the start capture window in the filter box?
If yes, then it is not working, I'm getting a parse
error...
Any help will be greatly appreciated.
Thank you,
Vlasis Hatzistavrou
_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users