As a first try, do a capture specifying promiscuous mode but not update in
real time. It seems to be the case that unless you do one of those first it
doesn't use promiscuous mode.
OTOH if one of the phones is local then you may not need promiscuous mode,
so that isn't the problem. Try it anyway.
--
Richard Urwin, Software Design Engineer
Ricardo Test Automation
Open House, 3 Watling Drv., Hinckley, UK.
rurwin@xxxxxxxxxxxxxxx
-----Original Message-----
From: Marcel Katz [mailto:marcel.katz@xxxxxxxxxxx]
Sent: 23 September 2001 06:37
To: ethereal-users@xxxxxxxxxxxx
Cc: marcel.katz@xxxxxxxxxxx
Subject: [Ethereal-users] cannot see SIP and SDP on Ethereal
I installed 0.8.17 on my win2k machine. I specify:
- Edit:Protcols: eth, ip, udp, tcp, sip, sdp
- in Filter: sip or sdp
- in Capture:Start, I selected all 4 boxes, Interface:
\Device\Packet_{4E3446CC-F203-4C11-98A7-F64F163DF5F7}, Count: 0 (Infinite).
I run 2 software phones, one on the same machine as Ethereal, on port 10001,
and another on another win2k machine on 10002. The problem:
I don't see anything being captured. I've seen the thing working with the
same configuration on other machines/networks.
Please help.
Many thanks.
Marcel Katz
marcel.katz@xxxxxxxxxxx
cell: 240-401-9035
home: 301-816-0855
_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users