Version: 0.8.16, compiled with GTK+1.2.8,with libpcap 0.4,with libz
1.1.3,without SNMP
With regards to:
> If you're running 0.8.14 or later, what happens if you try to capture on
> "br0" anyway?
When I start ethereal, I select capture, then start: The Ethereal capture
windows open. The interface selection box only has lo present. I would
not know how to select bro with the selection at this point.
--
Mike Cannon
Infrastructure Systems Administrator
Management Information
Purdue University
1061 Freehafer Hall (FREH)
West Lafayette, IN 47907-1061
office phone: 765.494.6357
office fax: 765.496.1380
email: cannon@xxxxxxxxxx
----- Original Message -----
From: "Guy Harris" <guy@xxxxxxxxxx>
To: "Mike Cannon" <cannon@xxxxxxxxxx>
Cc: <ethereal-users@xxxxxxxxxxxx>
Sent: Monday, April 02, 2001 3:18 PM
Subject: Re: [Ethereal-users] Using eteareal on host machine configured as
abridge
> > tcpdump will capture packets with or without the IP assigned.
> > ethereal will only display the br0 interface for selection if an
> > IP is assigned to br0.
>
> What version of Ethereal are you running? Versions prior to 0.8.14
> required that the interface have an IP address in order to support
> capturing at all; 0.8.14 and later don't.
>
> If you're running 0.8.14 or later, what happens if you try to capture on
> "br0" anyway?
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
>