Stefan, if you go into your Network Control Panel under the Configuration
tab do you see a line showing the packet driver bound to your ethernet card?
For example, it should say something like
"Network Packet Driver for Win95/98 v 2.02 -> Brand name of your ethernet
card"
If you don't see that line, or if you only see the packet driver bound to
some other interface, then I suggest you try re-installing the packet
driver. On my Win98 system I find that the packet driver install goes into
a kind of endless loop of re-prompting for the driver, but if I quit after
only the first interaction the driver is only bound to my dial-up adapter,
so I had to go through the loop a couple of times to get it bound to my
ethernet adapter.
Mike K.
----- Original Message -----
From: "Stefan Ulrich" <Stefan.Ulrich@xxxxxxxxxxxxx>
To: <ethereal-users@xxxxxxxxxxxx>
Sent: October 30, 2000 3:12 AM
Subject: [Ethereal-users] Etherreal for Win 98
> Hi!
>
> When installing Etherreal for Win98 according to your guidelines the
> programme will not find the Ethernet interface. The capture driver v
> 2.02 is installed.
> Is it possible to select the interface in teh programme?
>
> Kind regards
>
> Stefan Ulrich
> --
> Dr. Stefan Ulrich
> ExperTeach AG
> ------------------------------------------------
> Churerstrasse 160 A | Le Tr�si 6A
> CH-8808 Pf�ffikon SZ | CH-1028 Pr�verenges VD
> |
> Tel.: +41 55 420 25 95 | T�l.: +41 21 802 22 79
> Fax: +41 55 420 25 92 |
> ------------------------------------------------
> mail: Stefan.Ulrich@xxxxxxxxxxxxx
> web: www.experteach.ch
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users