Hi - I don't know about your particular 10/100 hub but many dual-speed
hubs have an internal bridge that segements the 10 mbs nodes from the
100mbs nodes. That might explain why you see only the bcast / multicasts
and your laptop traffic dependent on where the "most other machines
are". - HTH, Kirk
Yoann LeCorvic wrote:
>
> Hi All
>
> I setup Ethereal on a Linux Laptop with a 3c589d pcmcia 10Mb. This is plugged onto a 10/100Mb Hub where most of the other machine have
100Mb Network cards.
>
> What traffic should I expect to see. All traffic on this hub ? Only the 10Mb/s Traffic ? Only the traffic to the Laptop ?
>
> At the mement I see only packet sent to Bradcast, Multicast or my laptop.
>
> This is not a Switched hub, it's a normal one.
>
> Cheers
>
> Yoann Le Corvic - Internet Administrator
> Email :
> Web : http://www.infrasoft-civil.com/
> ========================
> Infrasoft Ltd
> North Heath Lane
> Horsham, West Sussex RH12 5QE
> United Kingdom
> Tel : +44 (0)1403 259511
> Fax : +44 (0)1403 217728
>
> **********************************************************************
> This email message, including any files transmitted with it, is
> confidential and intended solely for the use of the individual or
> entity to whom it is addressed. If you have received this email
> in error please advise the sender and delete the message.
> **********************************************************************
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users