Ethereal-users: Re: [ethereal-users] can't open an interface without IPv4 address assigned

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: work@xxxxxxxxxxx
Date: Tue, 26 Sep 2000 09:52:05 -0600
If your running linux, I would recommend one of the cards using
the acenic gibabit ethernet driver. You can find some more information
at:

http://jes.home.cern.ch/jes/gige/acenic.html

I would use a custom compiled 2.2.17 kernel, pentium III 800mhz, and 256MB
of ram.

On Tue, Sep 26, 2000 at 08:34:01AM -0600, Eichert, Diana wrote:
> 
> 	Question, do you have a suggestion for a hardware platform to
> analyze gigE traffic.  i.e. pentium III speed, memory, and which gigE card.
> 
> 	Also, anyone out there using the ATM enabled ethereal I read about
> awhile back?
> 
> once again,  thanks for a great tool.
> 
> diana

-- 
=========================================================================
Clinton Work                                        clinton@xxxxxxxxxxx
Calgary, Alberta