[Ming Zhang <mingz@xxxxxxxxxxx>]

report another bug. under certain sequence, the ethereal can not decode
command correctly. like the trace i attached, the command 0x25 can not
be recognized. this is a ms iscsi ini to connect an iscsi exported scsi
cdrom.


ming


On Sat, 2005-01-29 at 04:44, ronnie sahlberg wrote:
> i have checked in a fix.
> 
> you should consider changing your target to enable unsolicited data
> (InitialR2T=no)
> you should also enable ImmediateData on your target to allow phase collapse
> (ImmediateData=yes)
> 
> 
> your current configuration of the target is for minimum possible
> performance and will
> perform horribly bad, especially so if end-to-end latency is non-insignificant.
> 
> 
> 
> On Tue, 25 Jan 2005 21:16:42 -0500, Ming Zhang <mingz@xxxxxxxxxxx> wrote:
> > I found that latest ethereal can not decode the attached log correctly.
> > this is some iscsi traffic.
> > 
> >  i back checked all versions found that 0.10.6 works and fails since
> > 0.10.7 and latter version. it failed at both windows and linux version.
> > so i guess this is a common problem.
> > 
> > i am not on the list so pls cc to me. thanks.
> > 
> > 
> > ming
> > 
> > 
> > _______________________________________________
> > Ethereal-dev mailing list
> > Ethereal-dev@xxxxxxxxxxxx
> > http://www.ethereal.com/mailman/listinfo/ethereal-dev
> > 
> > 
> > 
> >

Attachment: iscsi-cd.gz
Description: GNU Zip compressed data