Ethereal-dev: RE: [Ethereal-dev] [Ethereal-users] h323 decoding problem

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: "Anders Broman (AL/EAB)" <anders.broman@xxxxxxxxxxxx>
Date: Wed, 19 Jan 2005 15:56:37 +0100
Hi,
Unfortunatly the trace is missing the TCP segments if you look at your trace again under TCP and include all the frames listed under
TCP segments in the capture I will try to have a look at it. ( Mark the frames and do "save marked frames"). Veryfy the trace by opening your
saved file again.
 
Best regards
Anders
-----Original Message-----
From: ethereal-dev-bounces@xxxxxxxxxxxx [mailto:ethereal-dev-bounces@xxxxxxxxxxxx]On Behalf Of Romel Khan
Sent: den 6 januari 2005 22:37
To: ethereal-users@xxxxxxxxxxxx; ethereal-dev@xxxxxxxxxxxx
Subject: [Ethereal-dev] [Ethereal-users] h323 decoding problem

Lot of h323 messages from Cisco GWs is not being decoded properly and is being labeled as Short Frame in ethereal. Calls are getting setup properly though and therefore, it seems to be ethereal deconding problem. Cisco is passing proprietary GTD information in the h225 encapsulation, which ethereal is not supposed to decode. But there are other information which ethereal has to be able to decode. See attached.