> -----Original Message-----
> From: ethereal-dev-bounces@xxxxxxxxxxxx [mailto:ethereal-dev-
> bounces@xxxxxxxxxxxx] On Behalf Of Francisco Alcoba (TS/EEM)
> Sent: Monday, October 25, 2004 6:29 AM
> To: 'Ethereal development'
> Subject: RE: [Ethereal-dev] Transform "H323 Conversations" to a more
> generic "VoIP Convesations"
>
> > Alejandro Vaquero wrote:
> >
> > > Hi Miha and All,
> > >
> > > I think the "H323 Conversation" is a really nice tool and soon
> > > probably be new protocols added to have the same
> > functionality (like
> > > SIP and MGCP). To this mind, I think we should create a
> > more generic
> > > "Voip conversation".
> .............
>
> Hi,
>
> I sent a proposal for the implementation some days ago, with some
comments
> on issues, in:
>
> http://www.ethereal.com/lists/ethereal-dev/200410/msg00146.html
>
> but I have received no feedback. Right now it works for SIP and ISUP
over
> MTP3.
>
Sorry I haven't seen your original mail. I'll add H323 based on the
current h323_conversation.
> > > have all the Voip calls together (H323, SIP, MGCP, etc..). In this
> > > window each call will have:
> > >
> > > "Protocol": H323, SIP, MGCP, etc...
> > >
> > > "IP:port A"
> > >
> > > "IP:port B"
> > >
> > > "Calling ID": this could be the number in H323/SIP/MGCP. Some
> > > protocols don't always have this info, for example in MGCP we
could
> > > put the EndpointID and in SIP the sip URI.
> > >
> > > "Called ID"
> > >
> > > "Status"
> > >
> > > "Comments": here put some protocol specific comments like
> > "Faststart",
> > > "H225 pkts" and "H245 pkts" on H323 calls
> > >
>
> What I sent has "protocol", "calling id", "called id", "status",
"number
> of packets", "starting time" and "comments". It does not have the
IP:port
> A and IP:port B -it does have an "initial speaker" - because that
focuses
> on calls where only two parties are involved. If you have a SIP call
with
> a couple of proxies it is hard to say which are the correct A and B to
put
> there.
>
> > > In this window will have a bottom similar than "Analyze" renamed
> > > something like "Add to Analyze". When clicked, this call
> > will be added
> > > to the "Voip Analysis" windows (similar than the "H323 Voip
> > Analysis"
> > > window). This will allow the user to add multiple calls to
> > analysis.
> > > For example if it is a call that started as H323 and then
> > it is SIP,
> > > you can add this "two" calls to analyze to have the whole picture.
>
> Te code I sent has a "Filter" button that ORs the data of one
conversation
> to the generic display filter. This is because I think that it can be
more
> useful to do the "analysis" stuff independent, you that you can use it
for
> other protocols. So right now you can select a call, add it to the
filter,
> do the same with two calls more, then apply the filter and see the
calls
> in the main window.
>
> > Ulf Lamping wrote:
>
> > I would like to have something not only for the VoIP
> > conversations. The
> > same mechanism would be helpful for a lot of other protocols as
well.
> >
> > So before start a special implementation for each and every protocol
> > seperately, we might find a general way to create such a thing.
> >
> > And I do think, that this would be possible to some extend. However,
> > this will be a bit more work for the first time implementation.
> >
> > I could help you with the GUI parts of that, but my knowledge on the
> > current conversation stuff is limited.
>
> That would also be easier if we separate the "conversation list"
function
> from the "flow display" stuff.
I think for the "flow or analysis display" will be better to be a
"graphic" instead of just a "list". The "conversation list" will fill a
structure when the "call" is selected to analysis. This structure is
like:
"Time"
"IP:port src"
"IP:port dst"
"Protocol"
"Message": with any additional info like: "SETUP 12345"
"Comment": additional comments
And then the "flow display" will have to display something like:
Time Protocol Node_A Node_B Node_C
Comments
1:00 H323_H225 SETUP 12345 --->
FastStart
1:00 H323_H225 SETUP 12345 --->
FastStart
1:01 H323_H225 <--- CALL PROC
The "Node_X" will be identified by just IP address (not the port). So
the "flow display" will dynamically add more nodes if it is necessary.
>
> Regards,
>
> Francisco
>
> _______________________________________________
> Ethereal-dev mailing list
> Ethereal-dev@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-dev