Ethereal-dev: RE: [Ethereal-dev] RTP Graph analysis
Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.
From: "Alejandro Vaquero" <alejandrovaquero@xxxxxxxxx>
Date: Wed, 22 Sep 2004 20:31:21 -0600
Hi, Attached is a new version with this fixed. It looks gtk1 is calling on_notebook_switch_page (the function for the "switch_page" signal) when the windows is destroy. At that point user_data was also free that caused the exception. Not sure why the signal is activated when the windows is destroy (this doesn't happened in gtk2). Anyway, I make a workaround to disconnect this signal before the windows is destroyed to fix this issue. Please let me know of any other issue. Thanks and Regards Alejandro -----Original Message----- From: ethereal-dev-bounces@xxxxxxxxxxxx [mailto:ethereal-dev-bounces@xxxxxxxxxxxx] On Behalf Of Anders Broman (AL/EAB) Sent: Tuesday, September 21, 2004 8:03 AM To: 'Ethereal development' Subject: RE: [Ethereal-dev] RTP Graph analysis Hi, I get a crash when closing the graph window using gtk1 on windows, MSVC points to: static void on_notebook_switch_page(GtkNotebook *notebook _U_, GtkNotebookPage *page _U_, gint page_num _U_, user_data_t *user_data _U_) { user_data->dlg.selected_clist = => (page_num==0) ? user_data->dlg.clist_fwd : user_data->dlg.clist_rev ; user_data->dlg.selected_row = 0; } Best regards Anders -----Original Message----- From: ethereal-dev-bounces@xxxxxxxxxxxx [mailto:ethereal-dev-bounces@xxxxxxxxxxxx]On Behalf Of Alejandro Vaquero Sent: den 17 september 2004 16:42 To: 'ronnie sahlberg'; 'Ethereal development' Subject: RE: [Ethereal-dev] RTP Graph analysis Hi Ronnie, I also tested it using Linux FC2 and with different captures files. Thanks Alejandro -----Original Message----- From: ethereal-dev-bounces@xxxxxxxxxxxx [mailto:ethereal-dev-bounces@xxxxxxxxxxxx] On Behalf Of ronnie sahlberg Sent: Friday, September 17, 2004 3:41 AM To: Ethereal development Subject: Re: [Ethereal-dev] RTP Graph analysis Have any of the telco voip people tested this patch yet? If no one objects to it I will test it and check it in in a few days. ----- Original Message ----- From: Alejandro Vaquero <alejandrovaquero@xxxxxxxxx> Date: Mon, 6 Sep 2004 16:20:25 -0600 Subject: [Ethereal-dev] RTP Graph analysis To: ethereal-dev@xxxxxxxxxxxx Hi All, I made the following enhancements to the RTP analysis tool (rtp_analysis.c): 1) Added a graphic analysis of RTP packets (see RTP_graph_analysis2.jpg for a screenshot). This graph displays the forward and reverse RTP packets over the time in the x axis, and the "jitter" and "difference" in the y axis. Where: - jitter: is the mean deviation of the difference in packet spacing at the receiver compared to the sender (as per RTP RFC1889). Basically this is the "average jitter". - difference: is the time difference in two consecutive packets at the receiver compared to the sender. This is basically the "jitter" between two consecutive packets (the time difference when the packet actually arrived and when it should theory arrive). This is the value that is more important to understand when there are voice problems. For example, if a device has a "jitter buffer" of 100ms, and you see that the "difference" is 150ms, that means there are a couple of packets that the device will drop because it doesn't feet in his "jitter buffer". This graph interface is based on io_stat.c and tested in Windows 2000 using GTK 1 and 2. 2) The graphic also display an "x" at the bottom of the x-axis if there was a "wrong sequence number" between two consecutives packets. This usually means a packet lost, or out of order packets. And will display an "m" for packets with the RTP "Mark set". This means the end of a silence period. 3) Fixed a bug where the reverse RTP packets were not displayed in the "RTP analysis tool" when using "Stream Analysis." menu option. 4) Display the "Delay" and "Jitter" column in "ms" instead of "sec". And added the percentage of packet lost to the statistic. Attached is a screenshot and the "diff" of rtp_analysis.c. Comments/suggestions are very welcome. Thanks and Regards Alejandro _______________________________________________ Ethereal-dev mailing list Ethereal-dev@xxxxxxxxxxxx http://www.ethereal.com/mailman/listinfo/ethereal-dev _______________________________________________ Ethereal-dev mailing list Ethereal-dev@xxxxxxxxxxxx http://www.ethereal.com/mailman/listinfo/ethereal-dev _______________________________________________ Ethereal-dev mailing list Ethereal-dev@xxxxxxxxxxxx http://www.ethereal.com/mailman/listinfo/ethereal-dev _______________________________________________ Ethereal-dev mailing list Ethereal-dev@xxxxxxxxxxxx http://www.ethereal.com/mailman/listinfo/ethereal-dev
Attachment:
rtp_analysis.c.patch
Description: Binary data
- References:
- RE: [Ethereal-dev] RTP Graph analysis
- From: Anders Broman (AL/EAB)
- RE: [Ethereal-dev] RTP Graph analysis
- Prev by Date: [Ethereal-dev] dissector registration question
- Next by Date: [Ethereal-dev] What to export for Win32 plugins
- Previous by thread: RE: [Ethereal-dev] RTP Graph analysis
- Next by thread: RE: [Ethereal-dev] RTP Graph analysis
- Index(es):