Ethereal-dev: Re: [Ethereal-dev] [PATCH] add password hash identifier in packet-aim.c

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: Jon Oberheide <jon@xxxxxxxxxxxxx>
Date: Mon, 12 Apr 2004 01:53:40 -0400
On Sun, 2004-04-11 at 21:13, Guy Harris wrote:
> On Sun, Apr 11, 2004 at 06:40:29PM -0400, Jon Oberheide wrote:
> > "Test" as in using the old method of AIM MD5 authentication and
> > observing the results in ethereal.  I am not sure if the AIM servers
> > would still even support this old method of authentication if I were
> > able to test it.
> 
> What's to test? Your change, which I checked in, only displays the TLV's
> data as hex; it's hard to get that wrong. :-)  Besides, that doesn't
> seem to be a reason not to change it to display 0x004c in the same
> fashion.

I modified gaim to use the old method of authentication and took a look
at the resulting packets.  Turns out 0x004c is still present...which
doesn't make sense given the gaim code but whatever.  I also tried
kopete (an alternate aim client) and it doesn't even use 0x004c.  So in
conclusion, I'm baffled by 0x004c right now...just forget I ever
mentioned it.  :)

Regards,
Jon Oberheide
jon@xxxxxxxxxxxxx