Jeff,
if I load my example file with the command given by you I DO see the
correct entry in the Info Column. I'm not using any Display filter.
What am I doing wrong to reproduce the bug you fixed? I just want to
make
sure that I can test the stuff in the future.
Thanks for any hints.
Best regards
Michael
On Monday, Jan 27, 2003, at 23:02 Europe/Berlin, Jeff Morriss wrote:
Hi Michael,
If I load a sample capture file (actually 'snoop' output from one of
our testers) like this (without a preferences file for the moment):
./ethereal -omtp3.standard:ITU -om3ua.version:"Internet Draft version
5" -r snoop.out.gz
the Protocol field says "M3UA" and I don't see (SCCP) UDTs in the Info
column.
If I then add a filter (e.g., "m3ua" or "mtp3") the Protocol column
gets set to SCCP and I see UDTs in the Info column. (Also the
protocol tree lists MTP3, SCCP, etc.)
Regards,
-Jeff
Michael Tuexen wrote:
Hi Jeff,
I have a capture file with version 05 M3UA in it. When I load it
without any display
filter all upper layers (up to SCCPMGT) are displayed.
Could you tell me under which condition the current version of the
M3UA dissector
does not work, i.e. does not see the upper layer. thank you very much
for the
clarification.
Best regards
Michael
On Monday, Jan 27, 2003, at 21:24 Europe/Berlin, Jeff Morriss wrote:
Hi list, hi Michael,
Right now MTP3 (and higher protocols) only get dissected on version
-05 and -06 M3UA messages if there is a filter.
Here's a patch to the M3UA dissector which pushes down the "if
(!tree)" evaluation so that the MTP3 dissector will be called even
when 'tree' is NULL (e.g., when there is no filter).
Regards,
-Jeff
--
Jeff Morriss
Senior Software Support Engineer
Ulticom, Inc.
Helpdesk: +1-856-787-2765
Fax: +1-856-222-9947
<packet-m3ua.c.patch.gz>
--
Jeff Morriss
Senior Software Support Engineer
Ulticom, Inc.
Helpdesk: +1-856-787-2765
Fax: +1-856-222-9947