Hi,
>From looking a the source it seems TPKT should already do TCP reassembly.
Make sure both these options are enabled:
Edit/Preferences/Protocols/TPKT/Desegment all TPKT ... which should be
enabled by default
Edit/Preferences/Protocols/TCP/Allow subdissector to desegment TCP streams
which should be disabled by default
With both these options enabled, ethereal will eat quite a lot more memory
but will desegment TPKT (and by default, all other TCP services capable of
desegmentation as well)
---
In general:
it should be fairly easy to add tcp reassembly to <protocol-x> and would
probably require minimal code.
example:
see packet-diameter.c
search for "desegment"
see dissect_diameter_tcp for a nice loop you can steal/borrow that handles
both
multiple PDUs in one segment as well as PDUs spanning multiple segments.
you also need to define an option to enable/disable the feature, see
packet-diameter.c for that as well.
----- Original Message -----
From: "Georg Hellack"
Sent: Tuesday, July 02, 2002 10:25 PM
Subject: [Ethereal-dev] Packet re-assembly for RFC1006; OSI upper layers ?
> Hello,
>
> first of all congratulations to the excellent work on Ethereal. I just
> tested it on some OSI via TCP communication using RFC1006.
> Apparently the TPKT (RFC1006) module does not do TCP packet re-assembly,
but
> decodes each TCP frame starting with the RFC1006 header.
> Is there anyone already working on this issue ?
> If not, are there examples from other protocols on how to do TCP
re-assembly
> in Ethereal in general ?
> I am also interested in OSI upper layers (Session, Presentation and ACSE).
> Anyone working on that ? Or can point out some sources of information on
> this beside the standard documents ?
>
> Best regards,
>
> Georg Hellack