[Greg Franks <greg@xxxxxxxxxxxxxxxxxxx>]

For the ISO 9542 packet, shown below, "Titel" should be "Title".  
Also, "Routeing" should be "Routing".

I could fix this myself, but what is the protocol for forwarding
changes back to the source archive?
  
  Signed
    Mr. ISIS wanna-be (A.K.A. greg)


Frame 2 (41 on wire, 41 captured)
    Arrival Time: Jan 23, 2002 15:57:15.0726
    Time delta from previous packet: 0.364108 seconds
    Time relative to first packet: 0.364108 seconds
    Frame Number: 2
    Packet Length: 41 bytes
    Capture Length: 41 bytes
IEEE 802.3 
    Destination: 09:00:2b:00:00:04 (09:00:2b:00:00:04)
    Source: 08:00:20:f4:ce:74 (Sun_f4:ce:74)
    Length: 27
Logical-Link Control
    DSAP: ISO Network Layer (0xfe)
    IG Bit: Individual
    SSAP: ISO Network Layer (0xfe)
    CR Bit: Command
    Control field: U, func = UI (0x03)
        000. 00.. = Unnumbered Information
        .... ..11 = Unnumbered frame
ISO 9542 ESIS Routeing Information Exchange Protocol
    Network Layer Protocol Identifier: ESIS (0x82)
    PDU Length    : 24
    Version (==1) : 1
    Reserved(==0) : 0
    PDU Type      : IS HELLO (R:000)
    Holding Time  : 30 seconds
    Checksum      : 0x3751 ( Is wrong )
    ### Network Entity Titel Section ###
    NETL: 10 Octets
     NET: 47222200.000000000100
    ### Option Section ###
        ESCT     : 600 seconds



-- 
   __@               Greg Franks              <|       _~@ __O 
 _`\<,_         Ottawa, Ontario, Canada        |O\   -^\<;^\<, 
(*)/ (*)                                       (*)--(*)%---/(*)
          "Where do you want to go today?"   Outside.